AT Logo

Model Kits for PistenBully Bodys and Accessories in 1:12

Note: All shown models contain selfmade accessories and details which are not available for purchase.

Accessories and Spare Parts

We developed a couple of 3D printed parts for detailing or upgrading of snow cat models in scale 1:12. These can be ordered at our Shapeways-Webshop. Current prices are listet in the webshop and they depend on the selected material.

Sprocket Wheel Hub


Insert fitting into the Pistenking sprocket for newer wheel hub types. Depending on the year either the original Pistenking hub or also this hub are used at the originals.

> Shapeways Webshop

 

Photo right: Axel Woltmann

Front Attachment Park Carrier

At the PistenBully 600 and 400 Park (not ParkPro!) the front attachment carrier is mounted on these parts. They fit for the Pistenking chassis. The left and right part are needes as well as a 6 mm tube to connect both parts at their lower end.

> Shapeways Webshop LEFT
> Shapeways Webshop RIGHT

Mounting Cutting Angle Cylinder Park

At all PistenBully Park versions the blade cutting angle cylinder is attached directly to the pushing frame. That's what this part is used for.

> Shapeways Webshop

Mounting Cutting Angle Cylinder 5mm

This part replaces the mounting fork at the Pistenking chassis for ball heads with 5mm width. That might be needed for some hydraulic cylinders.

> Shapeways Webshop

Angled Connector Dummy for Side Blades

This scale dummy part for the hose connectors to the blade side part cylinders is screwed to the blade carrier. It can be removed together with the blade and the attached hoses.

> Shapeways Webshop
> Installation Instructions

AlpinFlex-Tiller Hydraulic Connectors

These parts allow a scale representation of the power cables to the tiller wheel motors. The 4 parts are combined to a ring to reduce printing costs and must be cut apart.

> Shapeways Webshop
> Installation Instructions

Angled Hydraulic Connectors

With these parts scale angled hydraulic connectors can be realised, for example for the side finisher cylinders. The 4 parts are combined to a ring to reduce printing costs and must be cut apart.

> Shapeways Webshop
> Installation Instructions

     


Spare Parts

These spare parts are not listed in the Pistenking webshop. They need to be ordered by email.

Order Number Description Price
PB600-K PB600 driver cabin (PVC vacuum formed part, unpainted) € 45,-
PB600-M PB600 cover behind cabin: center part
(PVC vacuum formed part, unpainted)
€ 25,-
PB600-S PB600 cover behind cabin: side parts (air intakes)
(PVC vacuum formed part, unpainted)
€ 25,-
PB600-P PB600 platform-side covers + fenders
(PVC vacuum formed part, unpainted)
€ 25,-
PB600-A PB600 stickers silver "PistenBully 600" 1:12 € 12,-
PB600-W PB600/PB400 warning stickers in color 1:12 (also available in 1:6, 1:8 and 1:10) € 6,-
PB600-CA PB600 Cockpit stickers € 8,-
W-C Winch covers 1:12 (PVC vacuum formed part, unpainted) for PB300, PB400, PB600 winches € 50,-
W-A Winch stickers silver 1:12 for PB300, PB400, PB600 winches € 12,-
PB400-A PB400 stickers silver "PistenBully 400" 1:12 € 12,-
PB400-CA PB400 Cockpit stickers € 8,-
TG Door handles 1:12, PU casted raw part for 2 handles, for PB300, PB400, PB600 € 6,-
AFF-C AlpinFlex Tiller cover (PVC vacuum formed part, unpainted) € 25,-
AFF-A AlpinFlex Tiller stickers (PistenBully + warning stickers) € 10,-

These spare parts are not listed in the Pistenking webshop. They need to be ordered by email.